diamond ENGINERING WORKS is pioneer in manufacturing various food industries and agro-industries machinery to meet customized requirement of agro processor form time to time. Company having attached with agro industries since four decades has developed the state of art manufacturing facility to delivery efficient products as per generation requirement.
Our Gravity Separator is widely used for various materials like Pulses, Coffee Beans, Coco, husking etc. It gives an excellent separation for all grades of material like seeds and grains.
Diamond Gravity Separator works on principle of Separation of grains thru Gravity or Weight and forced air, initially the fans is kept off while introducing the grains particle on the deck of machine. Now in second stage the fans is switched On so the induced air will lift the particle in air , here the heaviest particle will be near the surface of deck and lightest particle will be above the surface of deck. In Third stage the Vibration of deck is operated in such way that the combine effect of air and vibration will separate the material in layers. With heavier layers on the bottom and lighter layers on the top of Deck. Thus these frequent operations will cause material to separate according to its gravity.
Machine can work efficiently for following two conditions:
1) PARTICLES OF THE SAME SIZE BUT WITH DIFFERENT SPECIFIC GRAVITIES CAN BE SEPARATED
2) PARTICLES OF THE SAME SPECIFIC GRAVITIES BUT WITH DIFFERENT SIZE WILL BE GRADED ACCORDING TO THE SIZE OF THE PARTICLES.
The machine is constructed using wooden/iron plate. The main part of machine is its upper Deck on which materials is feeded for separation. Under the deck is a cover in which air pressure is maintained. The separation takes place on screen or cloth.
The machine Deck has different mechanism of adjustment. Mainly there are 5 different adjustments to be considered.
FEED Rate: This adjustment is located on Feeder, it mainly control the amount or volume to be feed to deck. The feed rate should be kept at minimum at starting point, so to keep deck uncovered and to efficiently separate material as per the gravity.
Rear or End Raise: This raise is to adjust the flow of material from feeder to discharge end. It should be kept as per material requirement.
Side tilt. : It is used to adjust the horizontal tilt of deck.
Eccentric Speed: The eccentric speed can be adjusted or increased / decreed as per the requirement. The high eccentric sped will make material to move to high side of deck
Air Adjustment: The main adjustment of gravity separator. This is done with proper care. The high amount of air will make material fly and low amount of air will make material closely held. The air adjustment is providing with calibration for different gravities